Raising the Roof...

Well, not really... but I thought it sounded better than "Raising the Ceiling"!

So, now that you know the plan for exposed beams in the future media room... that got Mike thinking.  And that got him ripping...

He was off from work one day, and I came home to find the ceiling of the third floor hallway ripped down!  I was a little upset with him- but only because he didn't take before or during photos.  So, I'll do my best with "before" photos being from the light fixture getting installed (yep- that newly installed fixture had to come back down!)

BEFORE

AFTER

BEFORE

AFTER

I thought the idea itself is fantastic!  This will make that low ceiling hallway feel much more open!  But it's definitely in the "looking worse before it can look better" stage.

From hallway, looking toward unfinished
 storage area

Mike has built support beams/framing so that we can sheetrock up to the roof peak & enclose the new media room.

He had to do the same thing on the other side, to extend the wall seperating the unfinished storage area from the hallway.
Here he also needed to put up plywood so that the spray foam insulation has something to stick to.

Mike also has been doing this under the eaves, where the unfinished section will meet the finished section's storage area (for insulation purposes).


Of course, we're running into little unexpected issues... like the fact that the molding medallions were cut in half where they met the old ceiling (we were hoping they'd be whole underneath the plaster!)

We'll need to come up with a better solution there!


Also, there's the electric wire that runs down the stairs for the light switch...  It was fine when the ceiling was much lower, but now we need to run it up higher, and it's about 3 inches too short!  Grrr... just 3 inches!!!

Attic Beams

While I've posted photos that show the exposed beams in the attic, I don't think I've specifically called them out...

They are the original beams from when the house was built (1760-1790ish).  There are roman numerals carved into them, showing the order they were to be built!
Unfortunately, they don't show up that well in the compressed photos...

IIIX

IIX

X

We've decided that we're going to leave the beams exposed for the finished room.  The drywall will go up from the knee wall, along the slanted roof, up to the very top triangle where the electrical boxes have been installed (it will be flat at the very peak of the roof for the full length of the room).  This should make the room feel much taller than if we were to install the sheetrock across the bottom of the beams.

I think "white washing" the beams will help make the room feel more airy, and not as divided by the horizontal beams.  It should also mask the difference in look of the newer support beams that have been installed more recently (yet still prior to us).
And I just love that the history of the house's construction won't be covered up!

Radiator Handle Swap

I apologize that I've been slacking on my posts lately!  But rest assured, progress is being made :)  I just have to find some time to sit down and get the photos loaded & posts written up!

Today I have a quick addition to the attic radiator post...
I can't believe I forgot the part about the valve/handle not working anymore!  It actually flew off at one point, and there was a little piece missing.

Handle is on top-left side of radiator

Mike tried to find a replacement piece at Lowe's, but ended up having to buy a whole new valve.  I don't love it, but it's not terrible!

In fact, I was actually a little happy about this! The attic radiator is the same as the one in the bathroom (I could tell from the fancy markings on it).

The bathroom radiator handle was pretty beat up & the wood was chipped.  It kept snagging on the towels when we put them on the radiator to warm them.

So, Mike took the attic handle and replaced the beat-up parts on the bathroom radiator handle.  It looks so much better, and no more snags to my towels!

Back to the Attic- radiator re-installed

We've spent the last couple of weekends back in the attic.

First item up was re-installing the radiator... it had been located out way too far from the wall.   In order to move the radiator back closer to the walls we needed to shorten the pipes that ran under the eaves.

Mike had trouble unscrewing the pipes back in the spring when he removed the radiator to install the subflooring, so had cut them. Now that it's getting cold... we needed to be able to put the heat on.  So, this got bumped to the front of the project list!

Working under the eaves, it took a lot of muscle and use of his reciprocating saw, but Mike got the old pipes out and replaced with new.

Then my mom painted the radiator.  We had the silver Rustoleum paint left over from the bathroom radiator.

So, still a long way from finished... but inching forward!

Before- green radiator is
under the light bulb.

After

Some more shots of the room at this stage...

View from the doorway

Reverse view
(from the far left corner of previous photo)

October Yard Sales

Last weekend my mom & I hit a couple of yard sales.  I had lots of great little finds!

First is this pretty little dish with lavender flowers on it.  It's small (hard to tell size in this photo!)
I'm going to put it in my room for catching jewelry & loose change at the end of the day.

It was 50 cents!


In with the stacks of dishes, I found this round plate (in the back of the photo).  You can see how it matches the pitcher & bowl that I had bought years ago at an estate sale!
It was just 25 cents!

This really makes me want my butlers pantry.

Next I found a book for my oldest son.  He is very into the fact that our house was built between 1760-1790, during the time of the American Revolution.  I thought he'd enjoy this book filled with paintings from the time period.
It didn't have a price on it (I HATE when things don't have prices at a sale), but judging by the cheap prices on everything else, I took a chance... and it was only 50 cents :)

She also had some free children's books & I picked up a Peter Pan book.  It was in rough shape- but I thought maybe I'll eventually frame some of the pages as artwork.  No photo of it though because my youngest quickly commandeered it to his room!

Then I found this sweet little milk pitcher- in the yellow that I've been looking to use as an accent color in the family room.  It has a hairline crack, but since I'm just using it for decorative purposes, I didn't mind. And at just 50 cents, I couldn't pass it up!

Here's an updated shot of the family room cabinets on the left side of the fireplace...







And finally, to my favorite finds of the day!



First, a set of two small enamel pots.
They have measurement markings inside.

They were just a $1 each.

I don't know why I'm so drawn to enamelware lately!  I bought a cute little bucket Labor Day Weekend (and even put it to good use during my youngest's last birthday party!)

These two basins are kind of beat up, but I still love them!  I especially like the handles on the blue rimmed one.  These were just $1 each too!

I'm envisioning these on the shelves in the future laundry room or linen closets holding washcloths & hand towels.

"Rustic", right?  ha ha!

For now, I've put them on the wall going down the basement steps.  It's down below the stairwell area that we've finished, so this is where you step back into the 1700's era... and  I wasn't sure about sharing photos!

But what the heck, here's a peek --->



Can you believe I came home with all of that and I only spent $5.75!!!  So much fun!